CNC Lathes – AC 1700
The CNC lathe machine features a 3-step automatic spindle speed shifting system and advanced CNC control for enhanced precision.
• All castings are made from high-tensile Meehanite cast iron and undergo annealing treatment to remove internal residual stress.
• The machine features a wide, box-constructed bed with bed ways that are high-frequency heat-treated and precision-ground to ensure stability during high-speed operations and deep cuts.
Spindle auto speed shifting (3 steps) and CNC controlling.
• All casting are made of high tensile Meehanite cast iron which are annealed treatment to eliminate internal residual stress.
• Wide bed and box constructed, bed ways are high frequency heat treated, precision ground etc., to provide stability at high speed running or deep cut.
• Spindle & gear are made of CR-MO alloy steel which are carburizing & precisely ground, forced lubricating & oil bathed combined in headstock which can be prolonged servicing life.
• Three point support on the spindle with two taper roller bearings and one roller bearing to assure the accuracy & rigidity.
• High precision ball screw.
• CNC & Manual operation
• Tool radius & geometry compensation
• Constant surface speed for model with infinitive variable speed
• 8 bit bus, 32K RAM
• Serial port (RS-232 communication)
• Teach-in mode
• Semiautomatic, automatic (Cycle) and part program modes
• Rapid travels
Description\MODEL | Unit | AC-1730 | AC-1740 |
CAPACITY | |||
Center height | mm | 230 | |
Swing over bed | mm | 460 | |
Swing over cross slide | mm | 230 | |
Dist. Between center | mm | 750 | 1000 |
Bed width | mm | 300 | |
SPINDLE | |||
Spindle bore | mm | 58 (2”) | |
Spindle nose | – | A1-6 | |
Spindle speeds | rpm | 55 ~2800 | |
TRAVEL | |||
Cross slide travel X-axis | mm | 250 | |
Longitudinal travel Z-axis | mm | 550 | 800 |
Ball screw ( Dia. X pitch) | mm | X: Φ25 x P5 Z: Φ40 x P10 | |
FEED RATE | |||
X-axis rapid travel | M/min | 5 | |
Z-axis rapid travel | M/min | 7 | |
TAILSTOCK | |||
Quill dia. | mm | 58 | |
Quill travel | mm | 150 | |
Quill inside Taper | – | MT# 4 | |
MOTOR | |||
Spindle motor | HP | 7.5 / 10 (opt.) | |
X-axis drive motor | Nm | 6.3 | |
Z-axis drive motor | Nm | 6.3 | |
Coolant pump motor | HP | 1/6 | |
WEIGHT | |||
Net weight | kg | 2200 | 2400 |
Note :
We have the right to modify the specifications or designs. if there are subjected to change, without
prior notice.
Standard Accessories
- Faqor control
- Main spindle 2 steps speed auto Change
- By CNC Control
- Coolant equipment
- Lubricate equipment
- Work light
- Center sleeve
- Dead center
- Tool box & tools
- Operation & Service Manual
Optional Accessories
- Fanuc & Siemens Control on request
- 3-Jaw manual chuck
- 4-Jaw manual chuck
- 3-Jaw hydraulic chuck
- Manual toolpost (4T)
- Electric servo toolpost (H4)
- Electric turret (V8)
- Hydraulic turret (V8)
- C axis (Living tool)
- Steady rest
- Follow rest
- Boring attachment
- Double chuck system
- Rotating center
- Hydraulic tailstock
- Chip conveyer
- Heat exchanger
- Spindle oil cooler
- Tailstock type : Build in type quill
